Ad

Banana Cultivation

How to prepare bananas before sending them to the market so that they get maximum benefit?

How to prepare bananas before sending them to the market so that they get maximum benefit?

After harvesting the banana from the virtual stem, the bananas are separated from the bunch in different hands. After this, put these hands in the water tank of alum @ 1 gram alum per 2.5 liters of water. After dipping these banana hands for about 3 minutes, take them out. The alum solution removes the natural wax on the banana peels and also cleans the insect debris on the fruit. It acts as a natural disinfectant. After this, the second tank contains anti-fungal liquid Huwa San, inside which there is hydrogen peroxide with liquid silver components which acts as an antifungal, which does not allow the fungus to grow.

Also read: Demand for indigenous bananas rises abroad, banana exports worth Rs 327 crore

Hua San is a biocide and is effective against all types of bacteria, viruses, yeast, mold and spore makers. Legionella is also effective against pneumophila. Environmentally friendly – practically becomes 100% degradable to water and oxygen. Its use does not create odor, does not change the taste of treated foods. Effectiveness and long-term effects are observed even at very high water temperatures. Rated as safe for consumption at the recommended dosage rate. No carcinogenic or mutagenic effect, does not react with ammonium-ions. It can be stored for a long time. No side effects of any kind have been observed from using at the 3% recommended rate. In this solution, dip the banana hands for 3 minutes. Dissolve Huwa san @ 1 ml per litre of water to make a solution. In this way, 250 ml of Huva San liquid is poured into a 500 liter water tank. After removing the bananas from these solutions, place the bananas on the surface of the mesh on a good drainage floor with a high-speed fan to remove excess water from the bananas. In this way, the initial preparation of bananas is done. Packed in specially designed cartons. Bananas prepared in this way are easily repaired or sent to foreign markets.

What is Huwa-san?

 The process of combining hydrogen peroxide and silver stabilizer is unique worldwide and is based on the original Huva-San technology, which was further developed in ROM technology over the past 15 years.

Also read: Cold wave affecting banana production

 This technique is unique because no other stabilizing agent such as acid is required to stabilize the peroxide. All this makes Huwa-San Technology's products non-residual and extremely powerful disinfectant. Huwa-San is a one stop biocidal product that is effective against bacteria, fungi, yeast, spores, viruses and even mycobacteria and hence this products can be used in many areas to disinfect water, surfaces, tools and even large empty areas through evaporation.

Over the past 15 years, Hueva-San products were extensively tested on a laboratory scale and on numerous field trials around the world. The abundance of information within HUA-San's broad application spectrum along with technical knowledge has been the key to worldwide success.

 Huwa-San has been thoroughly researched and developed in lab and field test settings, it is completely safe and as a result, HUA-SAN products meet the latest standards for disinfection.


The most important nutrient for banana cultivation, symptoms of lack of potash and technique of managing it

The most important nutrient for banana cultivation, symptoms of lack of potash and technique of managing it

Potash, also known as potassium (K), is one of the necessary macronutrients required for healthy growth of all plants, including bananas. Potassium plays an important role in various physiological processes within plants, such as photosynthesis, enzyme activation, osmoregulation and nutrient. Lack of potash in banana plants has a harmful effect on their growth, fruit growth and overall productivity. Let's know about the major symptoms of lack of potash in banana plants and various strategies to manage it ....


Symptoms of lack of potash in banana plants

Potassium deficiency in banana plants is manifested through many types of symptoms that affect different parts of the plant. It is important to understand these symptoms for timely diagnosis and effective management. Some common symptoms of lack of potash in banana plants are as follows:


ALSO READ: How to manage the growing thrips in banana cultivation in Bihar and Uttar Pradesh due to monsoon active in September?


Symptoms of lack of potash on leaf

Brown of the edges of the leaf: The edges of the old leaves become brown and dry, this condition is called leaf scorching. 

Turning of leaves: The leaves turn up or downwards, which distorts their form. 

Yellowing among the veins: The yellow of leaf tissue between the veins, called interveinal chlorosis, is a common symptom.

 Leaf necrosis: In severe cases, necrotic (dead) spots may appear on the leaves, reducing photosynthetic activity.


Symptoms of lack of potash on fruit

Lowering fruit size: Lack of potash reduces the size of fruits, which affects the market price of bananas. 

Uneven ripening: Fruits do not cook evenly, making it challenging for business producers.


Symptoms of lack of potash on stem and bunch

Stagnant growth: The overall growth of banana plants may stop, resulting in reduced yield.

Small flakes: Fruits become small and thin due to lack of potash.


Also read: Banana's sigatoka leaf spot disease, causes, symptoms, effects and various measures to manage


Symptoms of lack of potash at the root

The roots are less empowered due to weak cell walls and become more sensitive to diseases.


Management of lack of potash in banana plants


Management of lack of potash in banana plants includes a combination of potassium on soil and leaves as well as other agricultural functions to improve the absorption and use of potassium. Some measures are being suggested here to effectively manage the lack of potash, such as:


Soil testing

Start by testing soil to assess potassium levels in the soil. This will provide correct guidance regarding determining the severity of deficiency and using proper potassium fertiliser.


Fertiliser application

Use potassium -containing fertilisers, such as potassium sulphate (K2SO4) or potassium chloride (KCL), based on soil testing recommendations. Include potassium fertilisers in the soil during planting or during the development of bananas. Monitor soil pH, as highly acidic or alkaline soil can reduce the amount of potassium. Adjust the pH level if necessary.


Also read: Panama Wilt Disease has affected the banana crop in these areas of India.


Spraying on the leaves

In cases of severe shortage, spraying potassium on the leaves is a quick remedy. To protect the leaves from burning, dissolve potassium nitrate or potassium sulphate in water and apply it in the morning or afternoon. Apply organic wet grass around banana plants to preserve soil moisture and maintain soil temperature continuously. This improves potassium absorption by roots.


Balanced nutrition

Ensure that other essential nutrients, such as nitrogen (N) and phosphorus (P), are also present in sufficient amounts to prevent the imbalance of nutrients. Bananas require 150-200 grams of nitrogen (n), 40-60 grams phosphorus (P2O5) and 200-300 grams of potash per plant on the basis of soil and variety. The use of one-fourth nitrogen (N) and one-third potash (K2O) in the time of flowering (reproductive phase) has been found to be beneficial. At the time of flowering, the use of nitrogen delays the ageing of the leaves and improves the weight of bunches and using a third potash improves finger filling. Using the total quantity of nitrogen and potassium into farming from a banana plant prepared by tissue enhancement provides maximum benefit by using the total amount of nitrogen and potassium such as the first planting, 45 days after planting, the third-90 days later, the fourth, the fourth -135 days later; 5th-180 days later. The entire amount of phosphorus fertiliser should be put at the time of last ploughing or while filling the pit.


Water management

Proper irrigation to avoid water stress, as drought conditions can increase potassium deficiency.


Also read: Learn about the characteristics and benefits of red banana


Crop circle

Change the banana crop with other plants to reduce the risk of lack of nutrients in the soil.


Disease and pest control

Immediately solve any disease or insect infection, as they can put pressure on the plant and obstruct the nutrients.


Harvesting and removing dead leaves

To promote the development of a healthy, potassium-efficient decnus, regularly damaged or sort dead leaves.


Monitoring and adjustment

Constantly monitor the plant's response to potassium treatments and adjust fertiliser experiments accordingly. Finally, it can be said that lack of potassium in banana plants has a significant negative effect on growth, fruit quality and yield. To overcome this deficiency and ensure a healthy and productive banana crop, timely diagnosis and proper management are necessary, including soil testing, fertiliser experiment and agricultural functions. By applying these strategies, banana producers customise potassium nutrition and get better overall plant health and fruit production.


BANANA CULTIVATION IS BEING DONE IN THIS STATE WITH TISSUE CULTURE

BANANA CULTIVATION IS BEING DONE IN THIS STATE WITH TISSUE CULTURE

Farmers can grow bananas with the help of tissue culture technique. This will greatly increase the income of the farmers. Also, the quality of the crop will also be good. Bananas are cultivated on a large scale in India. From vegetables to making chips, bananas are in great demand. Now in such a situation, the farmer brothers can earn a lot of profit by cultivating it. But, farmers can use tissue culture techniques for banana production .


BANANA PRODUCTION WITH TISSUE CULTURE TECHNIQUE

Cultivating Bananas with tissue culture technique can prove to be a very profitable business. The plants manufactured through this technique are disease-free and uniform, thereby improving the quality of the crop as well as the yield. There is improvement. In this, a small piece of the plant is produced in a special medium . This medium contains nutrients and hormones that help plant cells to divide at a rapid rate. Within a few months, the plants grow sufficiently and can be planted inside the field .



Also Read: Most Important Nutrient for Banana Cultivation Potash Deficiency Symptoms and Techniques to manage it


TISSUE CULTURE IS BEING CULTIVATED IN BIHAR

The farmers of Bihar are also producing bananas in a tissue culture manner, which will increase the quality of banana production in Bihar. Happening. The banana plant production is best produced in optimally drained and sandy loam soils. Loosen the soil well and remove weeds completely .  


WHAT ARE THE BENEFITS OF TISSUE CULTURE TECHNIQUE?

1) Plants manufactured with tissue culture techniques are free from disease, which helps in protecting the crop from diseases .

2) The plants prepared with tissue culture technology are of uniform size, which greatly improves the quality of the crop.

3) Plants constructed with tissue culture technique start bearing fruits faster than those prepared in a normal way.

4) Plants prepared with tissue culture technique give more production than plants prepared in the traditional way.